How to apply thermal conductive silicone grease

We are not unfamiliar with thermal conductive silicone grease, because it is a link between CPU and radiator to transmit heat, and widely used in various electrical appliances; but for the smear specification of thermal conductive silicone grease, I believe that many people do not know very well. If the operation is not standardized in the installation smear process, it will probably make the temperature of electrical appliances remain high, and even more serious will lead to burning. Next, Li Bang Xiaobian will share with you the correct smearing method of thermal conductive silicone grease.



Before we use thermal conductive silicone grease, we first need to clean the surface to be coated to ensure that there are no rust spots, grease and other impurities. It should be noted that no foreign matter can be mixed in the thermal conductive silicone grease, otherwise it will lead to poor contact with the radiator and shorten the service life of the module; if we use plastic brackets to coat the thermal conductive silicone grease, we can first put a small amount of thermal conductive silicone grease in the center of the module where the silicone grease is to be coated, and then use plastic brackets to gently cover a small amount of thermal conductive silicone grease evenly in the center. A surface to be treated. Then we should also pay attention to the uniformity of the thermal conductive silicone grease, not too thin or too thick, which will affect the thermal conductivity of the thermal conductive silicone grease.